Protective coatings
KRYTEX PPF & VINYL
Color-enhancing coating for all car films
For polyurethane PPF and vinyl wraps, gloss or matte: extends the film's hydrophobic properties, enriches color and shields it from UV and chemicals.
Prices on request for distributors, dealers and detailing studios.
Key properties
- Extends the film's hydrophobic properties.
- Repels dirt and water.
- Enriches film color.
- Shields from UV and chemicals, prevents fading.
- Reduces dirt build-up and makes cleaning easier.
- Also suitable for all types of paint.
- Lowers the risk of chemical burns (bird droppings, poplar buds, alkali).
- Protects against light mechanical damage (contact drying at the car wash).
- 100% effect when applied in 2 layers.
Specifications
Contact angle119°
Service life6–8 months
Layer thickness60–80 nm
Antistaticyes
ApplicationPPF & vinyl films
Recommended layers2, ≤ 5 min apart
Cure before delivery≥ 8 h
Acid/alkali resistancepH 1–14
Solvent resistanceAliphatic and aromatic solvents
UV resistance10–400 nm
Consumption1–2 ml/m²
Volume50 ml
Enough for≈ 2 cars
How to apply
- Two-phase wash; remove tar, oil and iron fallout, then use a clay mitt.
- Polish gloss film if there are minor defects; do not polish matte film.
- Degrease with KRYTEX DEGREASER.
- Load the applicator with 10–15 drops and apply in small sections, cross-hatch with several overlaps.
- After 10–60 s (depending on temperature and humidity) buff to a gloss with a clean dry microfiber.
- Apply 2 layers no more than 5 min apart, panel by panel. Cure at least 8 h before delivery.
- Work at 15–25 °C and humidity no higher than 60%, out of direct sunlight and away from water.
Composition & storage
- Composition
- Alkane solvent, organosilicon polymer, aminosilicone, tetraethoxysilane, polyorganosiloxane, methyltriethoxysilane.
- Shelf life
- 60 months
- Storage
- Keep tightly closed in the original container in a dry place at 0…+25 °C, away from direct sunlight. Do not use after the expiry date.
