Protective coatings

KRYTEX 7H+

Liquid glass for paint (top coat)

Packaging: 50 mlEnough for: ≈ 2–3 cars

Classic liquid glass that gives paint a deep “candy” gloss, a slick feel and richer color. Use on its own or as a top coat over KRYTEX 9H+.

All products

Prices on request for distributors, dealers and detailing studios.

Key properties

Contact angle115°

Service life6 months

Layer thickness40–80 nm

Consumption1–2 ml/m²

ApplicationBody paint

Cure before delivery≥ 8 h

Hardness (Mohs / Shore)3.5 / 90 (paint: 87)

Acid/alkali resistancepH 3–14

Solvent resistanceAliphatic and aromatic solvents

UV resistance10–400 nm

Wash resistanceup to 30 washes / 15,000 km

Volume50 ml

Enough for≈ 2–3 cars

Two-phase wash; remove tar, oil stains and iron fallout, then clay the paint to lift remaining contamination.
Polish the paint.
Degrease thoroughly with KRYTEX DEGREASER.
Load the applicator evenly with 10–15 drops; add 3–5 drops as you go.
Apply in small sections (40×40–50×50 cm) in a cross-hatch pattern.
When the product starts beading (≈10 s), buff to a gloss with a clean dry microfiber using moderate pressure.
Overlap the next section and buff the overlap carefully.
Use on its own or as a top coat over KRYTEX 9H+. Let it cure at least 8 h before delivery.
Work at 15–25 °C and humidity no higher than 60%, out of direct sunlight and away from water.

Composition: Alkane solvent, fluorinated hydrocarbons, trimethylated silica, aminosilicone, polyorganosiloxane, tetraethoxysilane.
Shelf life: 60 months
Storage: Keep tightly closed in the original container in a dry place at 0…+25 °C, away from direct sunlight. Do not use after the expiry date.