EN中文RU
KRYTEX 9H+ — Ceramic base coat for paint
Protective coatings

KRYTEX 9H+

Ceramic base coat for paint

Packaging: 50 mlEnough for: ≈ 2–3 cars

A foundational ceramic layer that deepens color, adds “hardness” to the paint and improves adhesion and lifetime of the top coat. Always sealed with KRYTEX 7H+ or KRYTEX MEGA 8.

All products

Prices on request for distributors, dealers and detailing studios.

Key properties

  • Increases paint “hardness”.
  • Deepens color.
  • Protects paint from fading.
  • Improves adhesion and lifetime of top coats.
  • 12–18 months of protection with a top coat.
  • Strengthens the top layer of paint by 3–15%.
  • Extends the life of the hydrophobic layer up to 2×.
  • Reduces the likelihood of chips.
  • Lowers the risk of corrosion forming and spreading.
  • Lowers the risk of damage from poor-quality car-wash chemicals and unskilled staff.

Specifications

Contact angle78°
Service life (with top coat)12–18 months
Layer thickness40–80 nm
Consumption1–2 ml/m²
ApplicationBody paint
Recommended layersBase + top coat (7H+ / MEGA 8)
Cure before delivery≥ 8 h
Hardness (Mohs / Shore)3.5 / 93
Acid/alkali resistancepH 1–12
Solvent resistanceAliphatic and aromatic solvents
UV resistance10–400 nm
Volume50 ml
Enough for≈ 2–3 cars

How to apply

  1. Two-phase wash; remove tar, oil stains and iron fallout, then clay the paint to lift remaining contamination.
  2. Polish the paint.
  3. Degrease thoroughly with KRYTEX DEGREASER.
  4. Load the applicator with 10–15 drops and apply in 40×40–50×50 cm sections, cross-hatch; add 3–5 drops as you go.
  5. When a rainbow (oil-slick) sheen appears (10–30 s), buff to a gloss with a clean dry microfiber.
  6. Wait at least 40 min (no upper limit) before another 9H+ layer or the top coat (7H+ / MEGA 8).
  7. Always seal with a top coat (KRYTEX 7H+ or KRYTEX MEGA 8). Cure at least 8 h before delivery.
  8. Work at 15–25 °C and humidity no higher than 60%, out of direct sunlight and away from water.

Composition & storage

Composition
Alkane solvent, silicon dioxide, trimethylated silica, aminosilicone, polyorganosiloxane, tetraethoxysilane.
Shelf life
60 months
Storage
Keep tightly closed in the original container in a dry place at 0…+25 °C, away from direct sunlight. Do not use after the expiry date.

Documents

Technical data sheet (TDS) · EnglishTechnical data sheet (TDS) · 中文Technical data sheet (TDS) · РусскийSafety data sheet SDS (EU REACH, German) · SDS

More from this range

KRYTEX MEGA GLASSKRYTEX MEGA GLASSHydrophobic coating for glassKRYTEX 7H+KRYTEX 7H+Liquid glass for paint (top coat)KRYTEX PPF & VINYLKRYTEX PPF & VINYLColor-enhancing coating for all car filmsKRYTEX MEGA 8KRYTEX MEGA 8Composite protective coating for paintKRYTEX MEGA 10KRYTEX MEGA 10Titanium protective coating for paintKRYTEX MEGA LEATHERKRYTEX MEGA LEATHEROrganic protective coating for leather